AUTOCLAVE

Product Price :Get Latest Price

1. At the time of opening/closing the lid of the autoclave, always keep the steam release valve open, never try to open the lid forcefully.

2. Before switching on the autoclave, check the lid is properly closed (the handles of lid & body are exactly
on top of each other)
3. The weight type safety valves are preset at required pressures. Do not add extra weights to them otherwise they might malfunction.
4. Clean the vent holes of the weight valves regularly with a thin wire to avoid any jamming.
5. Also keep the autoclave gasket free from dirt otherwise it may result in leakage from lid gasket.
6. Never operate the autoclave without water or with insufficient water. It can damage the autoclave & the heater.

7. When the lid is removed off the autoclave, keep it gently in upright position and on leveled surface. Jerks may damage the pressure gauges.
8. In case of any problem, stop using the autoclave and contact authorized dealer.

9. Do not shift the instruments under working conditions.

Product Price :Get Latest Price

• Automatic pressure cut off switch
• Digital temperature indicator cum controller
• Vacuum breaker
• Water level indicator
• Automatic self locking system
• Automatic low water cut off switch
• Moisture trap
• Fully automatic system with HMI PLC based autoclave with data logger digital pressure indicator cum controller, digital temperature controlled system can be installed on order.
• Vacuum Pump

Product Price :Get Latest Price

• Inner chamber, outer chamber & support ring are fully made of stainless steel.
• Heaters cover stand & carrier/bucket are made of stainless steel.
• Lid made of thick machined stainless steel plate. · Radial locking lid ensures user safety & safe locking.
• Lid is fitted with pressure gauge, spring loaded safety valve, double safety valve, manual exhaust valve, vacuum breaker as a safety device & water level indicator.
• Drain valve facilitates easy cleaning of the chamber. · Moulded joint less silicon rubber gasket.
• All internal joints are argon arc welded, ground & polished to give crevice free internals.
• Miniature circuit breaker for mains on/off plus safety of control panel.
• Industrial grade energy efficient heaters reduce power bills drastically.

Product Price :Get Latest Price

• Sterilizing pressure=1.2kgf/cm2 (15 psi) at 121C
• Operating pressure= from 15 psi to 22 psi (adjustable)
• Power supply=220x230 AC, 50/60 Hz Pressure Vessel= SS 304 Grade Stainless Steel
• External Wall=SS 304 Grade Stainless Steel
• Top Lid=SS 304 Grade Stainless Steel
• Basket= SS 304 Grade Stainless Steel

INCLUDING

1. Water Level Indicator.
2. Stainless Steel Basket.
3. Vacuum Breaker.
4. Automatic pressure control switch.
5. Automatic low water cut off switch.
6. Fully automatic PID purging system.

Product Price :Get Latest Price

• Inner chamber, outer chamber and support ring are fully made of stainless steel.
• Heaters cover stand and carrier/bucket are made of stainless steel.
• Lid made of thick machined stainless steel plate.
• Radial locking lid ensures user safety and safe locking.
• Lid is fitted with pressure gauge, spring loaded safety valve, double safety valve, manual exhaust valve, vacuum breaker as a safety device and water level indicator.
• Drain valve facilitates easy cleaning of the chamber.
• Moulded joint less silicon rubber gasket.
• All internal joints are argon arc welded, ground and polished to give crevice free internals.
• Miniature circuit breaker for mains on/off plus safety of control panel. · Industrial grade energy efficient heaters reduce power bill drastically.

Additional Information:

• Production Capacity: 5

Product Price :Get Latest Price

TECHNICAL SPECIFICATION

• Gasket: made of joint less silicon rubber.
• Exhaust pressure: manual through the exhaust valve
• Sterilizing pressure: 1.2 to 1.5 kgf/cm2 (15 to 20 psi) at 121C
• Operating pressure: from 15 psi to 20 psi
• Pressure gauge: 0.2.1 kgf/cm2 (30 psi)
• Tubular stand and supporting ring: made of mild steel or stainless steel
• Pressure Vessel= SS 304 Grade Stainless Steel
• External Wall=SS 304 Grade Stainless Steel
• Top Lid=SS 304 Grade Stainless Steel

Approx. Rs 74,500.00 / PieceGet Latest Price

• All body made of stainless steel.
• The inner/outer chamber & boiler are made of heavy gauge S S with leak proof argon ARC welding.
• The space between the outer chamber is filled with wool to minimize thermal losses.
• Hydraulically tested to withstand 2.5 times the working pressure.
• Steam boiler is fitted with water level indicator, pressure gauge, low water cut off device.
• This afford complete safety to the working personnel against explosive opening.
• An automatic vacuum breaker is fitted to all units as a standard accessory in order to break vacuum in case of steam condensation.
• The flanged immersion type heating element made from very high grade material provides fast formation of pressure in the system & are protected through a electric low water cut off device.
• The chamber is fitted with spring loaded safety valve & a dead weight release valve.
• Sterilization temperature : 120 C, 135 C.
• Suitable to work on 230 volts, single phase and 50Hz AC supply.